The Slayer is Back!

  • Intended Use: Enduro / All Mountain
  • Front Travel: 170mm
  • Rear Travel: 165mm
  • Wheel Size: 27.5”

Designed to lay waste to the world’s roughest trails, the Slayer is back as an all-carbon weapon. From the most aggressive Enduro World Series tracks to bike park laps and big mountain lines, its downhill-bike capability and pedaling responsiveness are matched with an uncanny ability to find and hold speed in rugged terrain. All killer, no filler.

“I’m super fired up that the Slayer is back. A few things really stood out to me through the development process—it pedals incredibly well, carries a ton of speed, and that extra bit of travel is awesome when you really want to rally! I see myself spending a ton of time on this bike." — Thomas Vanderham

Details

  • Full Smoothwall™ carbon frame
  • Ride-4™ adjustability chip for precise geometry adjustments
  • All sizes fit one water bottle inside the front triangle
  • Future-proofed to run Di2 and a dropper post concurrently
  • Max type Enduro cartridge bearing pivots with simplified hardware, Pipelock™ rocker link pivot
  • Shock-eyelet bearings for small-bump sensitivity
  • Single-sided chainstay and seatstay pivots for a narrower rear triangle—eliminates heel rub, even with Boost spacing
  • Metric shock, 230x65
  • 1x specific
  • Clearance for up to 27.5x2.5 “wide trail” tires, and compatible with 26+ tires (26x3.0)
  • Full-length internal dropper post and lockout routing. Internal brake routing in the front triangle, internal tube-in-tube shift routing
  • Oversized downtube ports for ease of cable routing
  • New derailleur hanger design reduces hardware complexity
  • Lightweight bolt-on axle saves 35g compared to a traditional Boost axle
  • PressFit BB92 bottom bracket, ZS44 | ZS56 headset
  • Post-mount 180mm rear brake
  • Max chainring size is 36t
  • Sizing: S/M/L/XL

Suspension

Our four-bar Smoothlink™ suspension has been tuned to eat up rough terrain and square-edged hits. We also increased the anti-squat values to make sure the bike pedals efficiently—whether you’re sprinting for a transfer stage or grinding towards a backcountry descent.

The Slayer features shock-mount bearings for incredible small-bump suppleness. Predictable, efficient, and capable, its rate curve provides good support at sag and a moderate ramp towards the end-stroke. 

Geometry

When we decided to bring the Slayer back, we knew it needed the crush-everything-in-its-path attitude of the previous generation while keeping the agility and efficiency that made it a favourite among aggressive trail riders. The updated geometry retains a fairly steep seat-tube angle, while the reach has been extended and the head-tube angle has been slackened.

We kept the BB drop neutral and the rear centre quite short to improve cornering, and shortened the seat-tube lengths to make room for the next generation of longer dropper posts.

Ride-4™ Adjustability

Our Ride-4™ adjustability system was chosen for the Slayer in order to provide precise geometry adjustments while leaving the suspension curve virtually unaffected. The head-tube and seat-tube angles can be changed by just over a degree, and the bottom-bracket can be raised or lowered by 7.5mm. This allows racers to adapt their geometry from track-to-track while keeping shock tuning predictable and simple.

Size Specific Tune

Size Specific Tune ensures that riders of all sizes get the right balance of small-bump compliance, mid-stroke support, and end-stroke progressiveness. Our design team does custom shock tunes based on real world field testing, and adjusts each tune for every specific frame size, from S to XL.

See the full "Return to the Rockies" photo epic here.

See all the models here.

 
Available December.