Geometry
| Size | 50 | 52 | 54 | 56 | 58 | 60 | | | | |
| Head Length | | | | | | | | | | |
| Head Angle | 74° | 74° | 74° | 74.5° | 75° | 75° | | | | |
| Seat Angle | 75.5° | 75.5° | 75.5° | 75° | 75° | 74.5° | | | | |
| Seat Tube length | | | | | | | | | | |
| Horiz. Toptube Length | | | | | | | | | | |
| Headtube Length | 500 | 525 | 540 | 550 | 570 | 580 | | | | |
| Chainstay Length | 395 | 395 | 395 | 395 | 395 | 395 | | | | |
| BB Drop | 60 | 60 | 60 | 60 | 60 | 60 | | | | |
| Wheelbase | | | | | | | | | | |
| Front-Centre | | | | | | | | | | |
| Standover Height | | | | | | | | | | |
| Fork Rake | 38 | 38 | 38 | 38 | 38 | 38 | | | | |
| Seat Tube (center-center) | | | | | | | | | | |
Geometry Descriptions Gideline :
1. Head Angle:The angle at which the Head Tube is oriented in relationship to the ground.
2. Seat Angle: The angle at which the Seat Tube is oriented in relationship to the ground.
3. Horizontal Top Tube Length: The distance from the centre of the top of the Head Tube projected horizontally to the intersection where it meets the Seat Tube axis.
4. Head Tube Length: The length of the Head Tube.
5. Chainstay Length: The distance from the centre of the Bottom Bracket to the center of the rear dropout.
6. Bottom Bracket Drop: The vertical distance from the Bottom Bracket centerline to the wheel axle plane. For some bikes this is a negative number indicating a Bottom Bracket Rise.
7. Standover Height: Distance from the top edge of the Top Tube to the ground measured at approximately the midpoint of the Horizontal Top Tube Length distance.
8. Front-Center: The shortest distance between the front axle and the Bottom Bracket centerline. Note this distance is not measured parallel to the ground, but rather is the straight-line distance between these two points.
9. Wheelbase: The distance from the rear axle to the front axle. The line formed by the joining of these two points serves as a basis of measurement for the Head and Seat Tube angles.
Frame may differt from real one. Use for reference only.
