Specification

Frame	RMB Custom 6061 Aluminum double butted D/T
Fork	Marzocchi 22R
Front Travel	100mm Rebound / preload Adjust
Rear Shock	N/A
Rear Travel	N/A
Head Set	FSA no TH-888
Stem	Alloy 31.8mm x 20° 80mm
Handlebar	XC Alloy 30mm rise, 600mm
Brakes	Shimano BRM486 hydraulic disc
Brake Levers	Shimano BRM486
Shifters	Shimano Deore Rapid Fire 9spd
Gearing (FR)	Shimano Deore 31.8mm
Gearing (RR)	Shimano SLX
Cranks & Chainrings	Truvativ Isoflow 165-170mm 42/32/22T
Bottom Bracket	Shimano BB-UN26
Pedals	VP-559 Flat w/pins
Hubs (FR)	Wheeltech Disc super sealed W/alloy QR
Hubs (RR)	Wheeltech Disc super sealed W/alloy QR
Cassette	Shimano HG-50-9 11-32T
Chain	Shimano HG53
Spokes	DT Champion
Rims	WTB SX24 alloy dbl wall disc 26
Tires (RR/FR)	WTB Moto Raptor 26 X 2.1 A.V.
Seat Post	Alloy 27.2mm
Saddle	WTB Speed She Comp

Geometry

Size	13.5”	15”	16.5”	18”
Head Length
Head Angle	70.5°	70.5°	71.0°	71.0°
Seat Angle	74.5°	74°	74°	73.5°
Seat Tube length	343	381	419	457
Horiz. Toptube Length	525	535	550	575
Headtube Length	100	100	100	110
Chainstay Length	425	425	425	425
BB Drop	30	30	30	30
Wheelbase	1022	1027	1037	1057
Front-Centre
Standover Height	720	737	756	774
Fork Rake
Seat Tube (center-center)

Geometry Descriptions Gideline :

1. Head Angle:The angle at which the Head Tube is oriented in relationship to the ground.
2. Seat Angle: The angle at which the Seat Tube is oriented in relationship to the ground.
3. Horizontal Top Tube Length: The distance from the centre of the top of the Head Tube projected horizontally to the intersection where it meets the Seat Tube axis.
4. Head Tube Length: The length of the Head Tube.
5. Chainstay Length: The distance from the centre of the Bottom Bracket to the center of the rear dropout.
6. Bottom Bracket Drop: The vertical distance from the Bottom Bracket centerline to the wheel axle plane. For some bikes this is a negative number indicating a Bottom Bracket Rise.
7. Standover Height: Distance from the top edge of the Top Tube to the ground measured at approximately the midpoint of the Horizontal Top Tube Length distance.
8. Front-Center: The shortest distance between the front axle and the Bottom Bracket centerline. Note this distance is not measured parallel to the ground, but rather is the straight-line distance between these two points.
9. Wheelbase: The distance from the rear axle to the front axle. The line formed by the joining of these two points serves as a basis of measurement for the Head and Seat Tube angles.
10. Seat tube Length (or frame size): The lenght between the centre of the bottom bracket and the top of the seat tube.

Frame may differt from real one. Use for reference only.

ST3

When we first started building bikes it quickly became apparent that traditional frame geometry wasn't going to cut it on the steep descents and tight turning singletrack of southern British Columbia. To help tame this rugged landscape we developed ST3 Geometry - or Sloping Top Tube Technology. A sloping top tube means increased frame stiffness and strength, and when things aren't going so well, more stand over height for crucial dismounting ease.

The frame layout creates a compact front end, giving increased agility in tight turning singletrack while providing increased stiffness for greater control in all conditions. It's also bomber construction: with a greater separation between the top tube/seat tube and seat tube/seat stay welds, frame stress is distributed over a larger area of the seat tube. Originated by Rocky Mountain and copied by others, ST3 delivers a better handling, stronger frame - the ride of a lifetime.

SPORT HARDTAIL