Specification

Frame	New HM monocoque carbon 12K finish frame full carbon w/seamless dropouts
Fork	Monocoque full carbon
Front Travel	N/A
Rear Shock	N/A
Rear Travel	N/A
Head Set	FSA Orbit CS threadless W/15mm carbon top cover
Stem	FSA Carbon Pro Lite flip-flop Carbon/alloy 31.8mm x 6° 90-100-110-120-130mm
Handlebar	FSA WING Pro compact dlb butted alloy 6061 31.8mm 400-420-440mm
Brakes	FSA Gossamer alloy Dual Pivot
Brake Levers	With shifter levers
Shifters	Shimano Ultegra 10spd
Gearing (FR)	Shimano Ultegra 34.9mm
Gearing (RR)	Shimano Dura Ace
Cranks & Chainrings	FSA Team Issue 170-172.5-175mm 50X34T
Bottom Bracket	FSA Mega EXO
Pedals	N/A
Hubs (FR)	Mavic Ksyrium Elite
Hubs (RR)	Mavic Ksyrium Elite
Cassette	Shimano 105-10 12-27T
Chain	Shimano 105
Spokes	Mavic Ksyrium Elite
Rims	Mavic Ksyrium Elite
Tires (RR/FR)	Vittoria Rubino Pro 700x23c F.V.
Seat Post	Carbon 31.6mm W/C
Saddle	Selle Italia Filente Special edition

Geometry

Size	45	48	51	54	57	60
Head Length
Head Angle	72.5°	72°	72°	72°	73°	73°
Seat Angle	74°	74.5°	74.5°	73.5°	73°	72.5°
Seat Tube length	450	480	510	540	570	600
Horiz. Toptube Length	515	534	550	566	587	600
Headtube Length	116	138	165	195	215	230
Chainstay Length	406	406	406	406	408	408
BB Drop	70	70	70	70	70	70
Wheelbase	956	968	971	981	997	1010
Front-Centre
Standover Height	733	755	784	801	815	842
Fork Rake	45	45	45	45	45	45
Seat Tube (center-center)

Geometry Descriptions Gideline :

1. Head Angle:The angle at which the Head Tube is oriented in relationship to the ground.
2. Seat Angle: The angle at which the Seat Tube is oriented in relationship to the ground.
3. Horizontal Top Tube Length: The distance from the centre of the top of the Head Tube projected horizontally to the intersection where it meets the Seat Tube axis.
4. Head Tube Length: The length of the Head Tube.
5. Chainstay Length: The distance from the centre of the Bottom Bracket to the center of the rear dropout.
6. Bottom Bracket Drop: The vertical distance from the Bottom Bracket centerline to the wheel axle plane. For some bikes this is a negative number indicating a Bottom Bracket Rise.
7. Standover Height: Distance from the top edge of the Top Tube to the ground measured at approximately the midpoint of the Horizontal Top Tube Length distance.
8. Front-Center: The shortest distance between the front axle and the Bottom Bracket centerline. Note this distance is not measured parallel to the ground, but rather is the straight-line distance between these two points.
9. Wheelbase: The distance from the rear axle to the front axle. The line formed by the joining of these two points serves as a basis of measurement for the Head and Seat Tube angles.
10. Seat tube Length (or frame size): The lenght between the centre of the bottom bracket and the top of the seat tube.

Frame may differt from real one. Use for reference only.